Typical use of COPs and ADMs to mount a dish on the face of a tower. Here the
tower has a 30
” face and 2.5” 90 degree angle legs. Extensions may be needed on towers where leg out angle is
longer than 2.5
”.
4” by 62” dish pipe
DCP
(Dish Clamp Piece)
need 8
DCPs and ADMs
use 5/8” hardware
COP
(Cross Over Plate)
need 4
SCPs and COPs
use ½” hardware
2.5” by 32” pipe
Note 2x3 spacer block
need 4.
